How to Replace Epson Workforce WF-3640 Ink Cartridges

You own an Epson workforce wf-3640 and dealing with a low ink issue? To tackle you have bought the replacement Epson workforce wf-3640 Ink cartridges but unable to replace the ink. Don't worry, the below-written steps will assist you in proper replacement of the ink cartridge in your Epson device.

Note: Before replacing any ink cartridges, it is essential you have a replacement ink ready with you to install after removing the earlier one. Do not open the new Epson Ink Cartridges, as they are packed in a vacuum and it prevents in the drying of the tip.

Step One: Switch on the printer

Before making such replacements, it is vital to turn on the device. The LCD will display a proper message on the regarding the ink low levels. You have to select PROCEED and follow the next instructions accordingly.

In the case you are making the changes before the intimation, then

Select the Home button

Press Setup> Maintenance> Ink Cartridge Replacement

Step Two: Lift the scanner unit

After switching on the device, lift the scanner unit to change the ink cartridge.

Step Three: Cartridge Cover

Carefully open the cartridge cover.

While doing this task, if the ink spills on your hand, immediately wash it and if it enters your mouth, spit it out and consult a doctor immediately.

Step Four: Remove the old cartridge

In this step, you have to squeeze the tab made on the cartridge and lift straight to remove it carefully.

Step Five: Open the new cartridge:

After removing the old cartridge, pick the new cartridge. Before opening it from its pack shake the ink and then remove the cover.

(Note: The shaking of the ink helps to move it in all the positions. Never remove the label or seal, this can cause to ink leakage. Try to install the ink cartridge in the Epson workforce wf-3640 immediately after you have removed the packing)

Step Six: Remove yellow Tape

While handling the Epson ink cartridges, carefully remove the yellow tape from it.

Step Seven: Insert the Ink Cartridge

Now, carefully insert the new ink cartridge in the holder and push it down until you hear the click sound.

Step Eight: Close the cartridge cover

In this step after installing the ink cartridge, push the cartridge cover carefully until you hear the click sound.

Step Nine: Press CHECK on LCD Screen

Press CHECK displayed on the LCD screen to be sure about correct installation.

Step Ten: Close the scanner unit

After correct installation, close the scanner unit and the printer starts priming the ink cartridge. This process will take a few minutes. Later, the LCD will display the message of ink replacement is done.

In conclusion, Epson workforce wf-3640 is an amazing printer which high quality and print speed. If you want to learn to replace the ink cartridge, the above-explained steps can assist you well.